Microcombi - CONSTRUCTA CC4P86660 Manuel D'utilisation Et Notice D'installation

a The appliance starts heating.
lights up.
a
a You can see the cooking time counting down.
8.7 Changing the microwave output setting
Press until the required setting is selected on the
▶
display.
Note: Touching it several times switches the output set-
tings from the highest to the lowest level.
If the microwave function is only added after starting,
the appliance pauses. Press
8.8 Pausing the operation
Press or open the appliance door.
1.
a The appliance stops the operation.
flashes.
a
Close the appliance door.
2.
Press ⁠ .
3.
a The appliance continues the operation.
lights up.
a
8.9 Stopping operation
You can stop operation at any time.
Turn the function selector to the off position.
▶
The fan may continue to run after operation has
been paused or stopped.
a The appliance stops any ongoing functions.
9 MicroCombi
You can combine the microwave function with all types
of heating and the steam function.
MicroCombi mode can be used with the following
functions:
Steam
¡
Hot air
¡
Grill
¡
Hot air grill
¡
Exceptions:
Microwave output of 1000 watts
¡
Hot air 40 °C
¡
9.1 Setting MicroCombi
Switch on microwave mode in addition to a type of
heating.
Set the function selector to a combinable type of
1.
heating.
a The display shows a default value for the temperat-
ure.
Use the rotary selector to set the temperature.
2.
To set the required microwave output setting, press
3.
⁠ .
a The display shows a default value for the cooking
time.
Use the rotary selector to set the cooking time.
4.
Press to start.
5.
a The cooking time counts down and the operation
starts.
to start.
8.10 Heating and drying the cooking
compartment
Always dry the cooking compartment after operation to
ensure that no moisture remains.
Allow the appliance to cool down.
1.
Remove the worst of the food residues from the
2.
cooking compartment immediately.
Wipe away any moisture from the cooking compart-
3.
ment floor.
Use the function selector to select ⁠ ⁠ .
4.
Press twice.
5.
is highlighted on the display.
a
Use the rotary selector to set a time of 15 minutes.
6.
Press to start.
7.
a The drying process starts and ends after
15 minutes.
Open the appliance door for 1 to 2 minutes to allow
8.
the steam to escape.
8.11 Drying the cooking compartment by
hand
Always dry the cooking compartment after operation to
ensure that no moisture remains.
Allow the appliance to cool down.
1.
Remove the worst of the food residues from the
2.
cooking compartment.
Dry the cooking compartment with a sponge.
3.
Leave the appliance door open for 1 hour so that
4.
the cooking compartment dries completely.
a You can see the cooking time counting down.
a lights up.
a Once the cooking time has elapsed, the appliance
stops the operation and a signal sounds.
9.2 Changing the microwave output setting
Press until the required setting is selected on the
▶
display.
Note: Touching it several times switches the output set-
tings from the highest to the lowest level.
If the microwave function is only added after starting,
the appliance pauses. Press
9.3 Pausing the operation
Press or open the appliance door.
1.
a The appliance stops the operation.
flashes.
a
Close the appliance door.
2.
Press ⁠ .
3.
a The appliance continues the operation.
lights up.
a
9.4 Stopping operation
You can stop operation at any time.
Turn the function selector to the off position.
▶
MicroCombi en
to start.
67