7. Operation
7.1
Transporting the individual device
Fig.: 9. Handles
The device has two handles at the side for transport pur
poses.
f Wind up the connecting cable (1) and place it on the
device, or fasten to the device with straps.
f Transport the device by the handles (2).
f Do not pull the device on the connection cable or use
the connection cable to carry the device.
f Only put down the device on the handles (as shown).
7.2
Stacking and securing devices
T
Risk of injury caused by toppling devices
2
f Do not stack more devices than specified on top of
f Pay attention to the weight distribution when stacking.
f Use suitable transport or auxiliary equipment for trans
f Only place stacked devices on level ground.
1
Fig.: 10. Stacking and securing devices (example)
f Stack a maximum of four devices.
f Secure the devices, e.g. with straps (1).
Transporting several devices
CAUTION
each other.
If the connection cables of the device are fastened to
the handles on the side, for example, this can lead to an
increased tilting moment.
port and for securing to prevent toppling.
max. 4
When attaching the straps, make sure that no
attachments are damaged by the straps when
tightening.
EN
1
43