1.3
Symbols used
Only a qualified electrician may carry out opera
tions marked with this symbol.
This symbol indicates an important note.
The symbol indicates additional, useful informa
tion.
f This symbol marks a prompt for action.
This symbol marks a listing.
This symbol is used to refer to another section in this
manual.
This symbol is used to refer to another document.
9
This symbol is used to point out a result.
2. For your safety
2.1
Target groups
2.1.1
Owner / operator
As the owner / operator, you are responsible for the
device.
You are responsible for proper and safe use of the device.
This includes instructing persons who use the device.
As an owner / operator without specialist electrical training,
you may only carry out simple activities that do not require
a qualified electrician.
These include, for example, plugging in and disconnecting
electrical consumers, visually inspecting the device for
defects and cleaning the device.
Electrical work on the device (e.g. repair work),
which requires specialist knowledge, may only be
carried out by a qualified electrician.
2.1.2 Qualified electrician
As a qualified electrician, you have received
recognised electrical training. Based on this
knowledge, you are authorised to carry out the electrical
work requested in this manual.
Requirements for qualified electricians:
Knowledge of general and special regulations pertain
ing to safety and accident prevention.
Knowledge of electrical regulations.
Knowledge of national regulations.
Ability to identify risks and avoid possible hazards.
EN
33