Connecting Electrical Consumers With A Low Protection Class; Plugging In Electrical Consumers; Disconnecting Electrical Consumers - Mennekes EverBOX Grip Manuel D'utilisation

7.5 Connecting electrical consumers with a
low protection class

7.5.1 Plugging in electrical consumers

Maintaining the device protection class
Only connect electrical consumers using suitable
plugs and sockets.
¨ Section 5.2
Fig.: 15. Inserting the plugs into the sockets
f Lift the hinged cover (1).
f Insert the plug (2) of the electrical consumer fully into
the socket (3).
46

7.5.2 Disconnecting electrical consumers

f Before disconnecting electrical consumers, first turn
Material damage due to incorrect operation
If you attempt to pull the plug out of the socket via the
cable, you may pull the cable out of the plug enclosure.
f Unplug the device from the socket via the plug enclo­
1
2
3
Fig.: 16. Unplugging the plugs from the sockets
f Slightly lift the hinged cover (1).
f Pull the plug (2) of the electrical consumer out of the
them off at their own ON/OFF switch.
T
ATTENTION
sure only; do not pull on the cable.
socket.
1
2