Symbols Used; For Your Safety; Target Groups; Intended Use - Mennekes Basic 3,7 Instructions De Fonctionnement Et D'installation

1.3

Symbols used

Only a qualified electrician may carry out opera-
tions marked with this symbol.
This symbol indicates an important note.
The symbol indicates additional, useful informati-
on.
f This symbol marks a prompt for action.
„ This symbol marks a listing.
Î This symbol is used to refer to another section in this
manual.
This symbol is used to refer to another document.

9 This symbol is used to point out a result.

2. For your safety

2.1

Target groups

Owner
As the operator, you are responsible for the device.
You are responsible for proper and safe use of the device.
This includes instructing persons who use the device.
As an operator without specialist electrical training, you
may only carry out activities that do not require a qualified
electrician.
Electrician
As a qualified electrician, you have received
recognised electrotechnical training. Based on
this knowledge, you are authorised to carry
out the electrotechnical work requested in this
manual..
Requirements for qualified electricians:
„ Knowledge of general and special regulations pertai-
ning to safety and accident prevention.
„ Knowledge of electrotechnical regulations.
„ Knowledge of national regulations.
„ Ability to identify risks and avoid possible hazards.

2.2 Intended use

MENNEKES Basic charging columns are charging systems
designed for use in private and semi-public areas,
e. g. company car parks, depots or private property.
This charging system is used solely to charge electric vehi-
cles.
„ Charging according to IEC 61851-1 Mode 3 for vehicles
with non-gassing batteries.
„ Mode 1 charging as per IEC 61851-1 (only Basic S 22).
„ Plugs and sockets as per IEC 62196.
Vehicles with gassing batteries can not be charged.
Operation of the charging system as standalone without
connection to a server system.
The charging column is intended solely for fixed installa-
tion.
EN
3