Erasing The Memory Of The Motor; Troubleshouting; Technical Data - SOMFY Sonesse 30 RTS Notice D'installation

7.14. Erasing the memory of the motor

To reset the motor, press the prog button on the motor
head until the shade makes an Up and Down movement
3 times.
All settings are erased.

8. TROUBLESHOUTING

Questions on the Sonesse
The motor doesn't work:
Verify:
• The wiring of the motor.
• The power supply specifications.
• The compatibility of the control
• The heat generated (wait 5 minutes for the cooling of the motor).
The equipment stops too soon:
Verifiy:
• The operation of end-limits during the rotation of the motor.
• The crown is properly fitted to the tube.
• The end-limits of the motor are properly adjusted.
• Verify that the shade is within the recommended weight limit.

9. TECHNICAL DATA

Power supply
Radio frequency
Torque
Speed
Roller Speed
(By default)
Tilting Speed
(By default)
Operating temperature
Protection rating
For additional information on the technical data for this drive contact your Somfy representative.
14
®
30 RTS?
24 Vdc
433,42 MHz
2 N.m
6 → 28 rpm
28 rpm
16 rpm
0°C / + 60°C
IP 30
Copyright © 2013-2016 Somfy SAS. All rights reserved
x3