HumanTechnik lisa Mode D'emploi page 12

Positioning the radio transmitter
Bear in mind the following points
when positioning the radio trans-
mitter, in order to achieve the greatest
possible range from the radio trans-
mitter:
- The radio transmitter should not be
set up close to devices which emit
powerful interference signals, such
as TVs, computer monitors or mobi-
le phones.
- The radio transmitter should not be
placed on metallic objects, since
otherwise the radio range will be
restricted by metallic shielding.
- Position the radio transmitter as
close to the centre of the building
as possible, at a medium height in
the room.
Maintenance and care
The Infrared motion transmitter does
not require any maintenance.
If the unit does become dirty, simply
wipe it clean with a soft, damp cloth.
Never use spirits, thinners or other
organic solvents. Do not set up the
Infrared motion transmitter where it
will be exposed to full sunlight for
long periods. In addition, it must be
protected against excessive heat,
moisture and severe mechanical
shocks.
12 English
Note: This product is not protected
against splash water. Do not place
any containers filled with water, such
as flower vases, or anything with an
open flame, such as a lit candle, on
or near the product.
Warranty
The Infrared motion transmitter is a
very reliable product. Should a mal-
function occur despite the unit having
been set up and operated correctly,
please contact your dealer or the
manufacturer directly.
This warranty covers the repair of the
product and returning it to you free of
charge.
It is recommended that you send in
the product in its original packaging,
so keep the packaging for the durati-
on of the warranty period.
The warranty does not apply to dama-
ge caused by incorrect handling or
attempts to repair the unit by people
not authorised to do so (destruction of
the seal on the unit).
Repairs will only be carried out under
warranty if the completed warranty
card is returned accompanied by a
copy of the dealer's invoice/till receipt.
Always specify the product number
in any event.