Emptying / Inserting Condensation Container - Wella HAIRSPA ION Mode D'emploi

4 Preparing appliance
Figure 4
4.4

Emptying / inserting condensation container

During treatment, condensed water accumulates along with the residues of
cosmetic hair products in a condensation container j under the appli-
ance.
The condensation container j is made of transparent material so the li-
quid level can be seen at any time.
Soiling of appliance
• To prevent the appliance overflowing and becoming soiled
by cosmetic hair products, the condensation container j
should be emptied after every treatment.
1. Remove condensation container j from the appliance and empty it.
2. Insert the condensation container j as far as it will go
NOTE
1521126, Edition 2012-11, Version 4
.
59