Switching On; Working - Stihl RE 361 Notice D'emploi

Switching On

Turn on water supply
N
The machine may only be switched on
when the water intake hose is connected
and the water supply has been turned
on. Otherwise the machine may be
damaged due to lack of water.
Completely unroll the high-pressure
N
hose
Turn the master switch to I – now
N
the machine is in standby mode
Point the spray gun at the object to
N
be cleaned – never at persons!
When the machine is switched on,
voltage fluctuations that occur under
unfavorable mains conditions (high
RE 361, RE 361 PLUS, RE 461, RE 461 PLUS, RE 471 PLUS
power line impedance) may negatively
affect other connected electrical
appliances.
Trouble is not anticipated at power line
impedances less than 0.15 ohms.

Working

Actuate the spray gun
Direct the spray attachment towards
N
the object to be cleaned
Point the rotary nozzle downwards
N
when starting (if fitted)
1
Press the safety latch (1) in the
N
direction of the arrow – the lever (2)
is unlatched
Squeeze the lever (2)
N
The motor stops when the lever is
released.
Standby
The machine must not be operated in
standby mode for more than 5 minutes.
If work is interrupted for more than
5 min., during breaks or if the machine is
left unattended, switch off the machine
at the master switch – see "Switching off
the machine".
English
39