Positioning The Child Seat: Booster Mode; Using Luas - Britax Frontier XT Guide D'utilisation

Positioning the Child Seat: Booster Mode

WARNING!
• Position forward-facing
lap-shoulder belt.
• Use only the vehicle's lap and shoulder belt system when
securing a child in booster mode. Never secure a child
with a lap belt only in booster mode.
• Always secure the unoccupied child seat.
• If the LUAS anchors in your vehicle prevent proper vehicle
seat belt fit across your child you cannot use the LUAS to
position this seat in booster mode. See below.
The vehicle seat belt fits properly
when the lap part sits low across
the child's hips (a) and the
shoulder part lies across the
child's shoulder and does not
contact the child's neck when
routed through the upper belt
guide (b).
52
only in a seating position with a
a
Using LCS
Before you begin:
Does your vehicle have a top tether anchor in the chosen seating
9
position?
9 Does your vehicle have LUAS anchors in the chosen seating position?
IMPORTANT: Use the LUAS only to position this child seat to your vehicle
seat. Secure your child using the vehicle's lap-shoulder belt system.
Detach the Versa-Tether
1
from the storage clip.
Ensure the positioning block
2
is rotated to the back.
Place the child seat on the
3
vehicle seat and connect the
LCS connectors to the vehicle
LUAS anchors.
Push the child seat into the
4
vehicle seat and pull the end
of each LCS strap through
the belt slot to remove slack.
* Repeat as necessary. Store
b
excess webbing behind cover.
Positioning the Child Seat: Booster Mode
hook
®
53