Britax Frontier XT Guide D'utilisation page 14

Child Seat Functions
Using the Versa-Tether
WARNING!
• Attach the Versa-Tether only to tether anchors identified by
your vehicle manufacturer as tether anchorage points.
• If your vehicle does not currently have a tether anchor
attachment, refer to your vehicle owner's manual or
contact your vehicle man u fac tur er for assistance. DO
NOT modify your vehicle without advice from your vehicle
manufacturer.
• You MUST always use the Versa-Tether in harness mode.
Using the tether will improve the stability of your child seat
and reduce the risk of injury.
Tether anchor locations vary
from vehicle to vehicle. Check
your vehicle owner's manual
and look for the tether anchor
symbol shown in the diagram
to help identify where the top
tether anchor point is located
in your vehicle.
24
OR
OR
To remove the Versa-Tether from the storage clip:
Remove the webbing from the
1
elastic strap and loosen the
Versa-Tether.
Remove the Versa-Tether
2
hook from the storage clip.
To attach the Versa-Tether to the storage clip or a tether
anchor:
Firmly press the hook over the
1
storage clip or tether anchor
point.
Always attach the hook over
2
the anchor point.
IMPORTANT: Use the elastic strap
to contain extra webbing. Always
ensure any excess webbing is
contained within your vehicle.
Child Seat Functions
®
OR
OR
25