Britax Frontier XT Guide D'utilisation page 30

Securing Your Child
Loosen the harness.
1
a Press release lever
b Pull both harness straps forward
Open the chest clip.
2
a Press tabs
b Pull apart
Release the buckle and place
3
the harness straps around the
armrests.
Place the child in the child
4
seat and position the harness
straps around the child.
Fasten the harness buckle.
5
* Proper connection is confirmed
with an audible click after
inserting each buckle tongue.
56
Pull the harness adjuster strap
6
to tighten the harness.
* The harness should have
a comfortable but snug fit
around the child. A snug strap
should not allow any slack. It
lies in a relatively straight line
without sagging. It does not
press on the child's flesh or
push the child's body into an
unnatural position. You should
not be able to pinch excess.
Fasten the chest clip.
7
* The correct height for the chest
clip is at the middle of the
chest at armpit level.
* The HUGS ™ chest pads may
be placed in any position
that is comfortable for the
child within the range of the
correctly placed chest clip.
Checklist
Before traveling, verify that the:
9 Harness straps are not twisted.
Harness is snug.
9
Buckle is fastened.
9
9 Chest clip is at the child's armpit level.
Securing Your Child
Pull the harness adjuster away
from the child seat (parallel to
the ground) to tighten.
Do not pull sideways.
7
57