Vehicle Compatibility
Compatible Vehicle Seat Belts
NOTE: The information in this section only applies to installation
with vehicle seat belts.
Vehicle seats and seat belts differ from vehicle to vehicle. Refer to
your vehicle owner's manual for specific information about your
vehicle seat belts and their use with child seats.
Lap-Shoulder (3-Point) Belt
1.
ALR (Automatic Locking Retractor) with Sliding Latch Plate
Has a latch plate that freely
a
slides along the vehicle seat
belt webbing.
Has a retractor that stops the
b
belt from being pulled out
again once the belt webbing
has been pulled out at least
61 cm (24 in.).
Tightens by feeding the
c
belt webbing back into the
retractor.
10
2.
ELR (Emergency Locking Retractor) with Locking Latch Plate
Has a latch plate that does
a
not allow the lap part of the
belt to become loose after it
is buckled.
Has a retractor that locks
b
only in an emergency
situation such as sudden
stop or crash.
Latch
Plate
3.
Switchable Retractor in ALR Mode with Sliding Latch Plate
Has a latch plate that freely
a
slides along the vehicle seat
belt webbing.
Has a retractor that can be
b
switched to function as an
ALR by pulling the vehicle
seat belt fully out until a
clicking sound can be
heard when retracting.
*
To use a child seat with this
type of vehicle seat belt, you
will need to switch to the ALR
mode or use a locking clip.
Vehicle Compatibility
Latch
Plate
Latch
Plate
11