Britax Frontier XT Guide D'utilisation page 13

Child Seat Functions
Using the Lower Universal Anchorage System (LUAS)
and Tether
The figure above shows typical locations for lower anchors and
tether anchors in a vehicle. Check your vehicle owner's manual for
the exact LUAS anchor locations and seating positions (if equipped),
information on use with a child seat, and for the maximum weight
rating for the LUAS anchors.
Standard vehicle seat spacing between LUAS anchors is 27.9 cm
(11 inches). This child seat can be used in a seating position with
up to 50.8 cm (20 inches) of space between the LUAS anchors if the
vehicle manufacturer allows.
22
Using the Lower Connector System (LCS)
The LCS connectors are located on the sides of the shell in the
storage slots. Store the LCS connectors when not in use.
To remove the LCS connector from the storage slot or lower
anchor:
Press and hold the red release
1
button.
Pull the LCS connector from
2
the storage slot or lower
anchor.
To attach the LCS connector to the storage slot or lower
anchor:
Firmly push the LCS connector
into the slot or lower anchor until a
click is heard to store.
NOTE: The LCS connectors store
in the slots with the top down.
Child Seat Functions
Top
23