Agilent Technologies TV 303 Notice De Mode D'emploi page 202

16 Instructions for Use
Installation
The TV 303 can be installed in any position. Fix the TV 303 in a stable
position connecting the inlet flange of the turbopump to a fixed
counter-flange capable of withstanding a torque of 1000 Nm around
its axis.
For example the ISO 100 K flange can be fixed using high strength
steel clamps (as Agilent model IC 63250 DCMZ).
The following table shows, for each flange dimension, the necessary
number of clamps IC 63250 DCMZ and the relevant fixing torque
Flange
ISO 100 K
The TV 303 cannot be fixed by means of its base.
NOTE
The TV 303 belongs to the second installation (or overvoltage) category as per
CAUTION!
directive EN 61010-1. Connect the device to a mains line that satisfy the above
category.
The TV 303 has Input/Output and serial communication con-nectors that must
be connected to external circuits in such a way that no electrical part is
accessible.
Be sure that the insulation of the device connected to the TV 303 is adequate
even in the case of single fault as per direc-tive EN 61010-1.
For installation of optional accessories, see "Technical Information".
202/268
Fixing device
M10 clamps
TV 303 User Manual / 87-901-019-01
N. Fixing torque
4 22 Nm
(A)