Intended Use; Required Worksite Conditions; Warranty; Transport And Storage - Hürner CNC ECO 200 Manuel Utilisateur

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
• The machine must be operated only when in proper state of repair
and for one of the intended uses. Before welding, the welder is
required to make sure that the state of the machine is in order.
• The user has to make sure that only one person is present in the
work zone where the machine is operating.
During transport, the facing tool and the heating element
have to be placed into the provided carrying rack at all times.
Important
2.5

Intended Use

The Butt-Welding Machine is intended exclusively for joining plastic
pipes and fittings according to the butt-welding process with heating
element. See Section 3 for an overview of the welding process enabled
by this machine.
The notion of intended use also includes:
• Compliance with the instructions in the User's Manual
• Observation of all service and maintenance intervals
All uses other than those mentioned above are not allowed
and will cancel any and all liability or warranty by the manu-
facturer. Unintended use may cause considerable hazards and
Important
material damage.
2.6

Required Worksite Conditions

• The conditions have to fully ensure that the machine cannot slide.
• Worksite access limitations have to be provided. Appropriate
equipment to achieve this can be ordered with the manufacturer.
• The machine must never be used if there are foreign bodies or
objects in the work area; in particular, it must not be started if
anything obstructs the smooth movement of any movable part
or component of the machine.
2.7

Warranty

Warranty claims may be raised only if the conditions for warranty
given in the General Terms and Conditions of Sale and Delivery obtain.
2.8

Transport and Storage

The box in which the product arrives should also be used for storage as a
protection against humidity. During transport or storage in the box, the hy-
draulic tubing should not be detached or squeezed. The pipe facing tool
and heating element have to be transported in the provided carrying rack.
Because of the heavy weight of the hydraulic unit and the
basic machine chassis of the butt welder, they have to be
transported or moved on site by two persons and/or using
Caution
appropriate hoisting tools as required.
2.9

Identifying the Product

Every product is identified by a name plate. It shows the model ("Typ"),
the serial number ("Seriennr."), the most important specifications of
the hydraulic unit, and the manufacturer. The first two digits of the
serial number represent the year of manufacture.
3

Understanding the Machine

This butt-welding machine for plastics can be used both as an on-site
Version February 2018 HÜRNER CNC ECO 200 User's Manual
Stumpfschweißmaschine
Typ CNC 200 ECO
Seriennr. 120007204
Netz 230V 50Hz 800W
Gewicht 44kg Baujahr: 2012
Hersteller
HÜRNER Schweißtechnik GmbH
Nieder-Ohmener Str. 26 Nieder-Ohmener Str. 26
D - 32325 Mücke D - 32325 Mücke
7
EN