Work Environment; Intended Use; Machine Description; Component Overview - Hürner EasyWeld 110 Manuel Utilisateur

• Do not expose the machine to the elements and do not
use it in unfavorable weather conditions (fog, snow,
rain, high levels of humidity, etc.).
• Respect any applicable rules on occupational safety in
force at the place the machine is used, and use common
sense to avoid any hazardous situation.
2.2

Work Environment

• Do not use the machine, in particular its heating ele-
ment, when flammable liquids or gases, chemically reac-
tive or corrosive agents are in the vicinity.
• Make sure that the place were the machine is used and
its immediate surroundings are sufficiently brighty illu-
minated.
• Operate the machine only when it is connected to a
power supply source that is adequate for the power
supply requirements posed by the electrical facing tool
and the electrical heating element.
2.3

Intended Use

The use the product is intended for is described at the be-
ginning of Sect. 1.
Any other use is deemed unintended, and any such use will
void any and all warranty and liability assumed by the man-
ufacturer for the product, including for consequential dam-
age.
3

Machine Description

3.1

Component Overview

6
EN
HÜRNER EasyWeld 110 (T) User's Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Clamps
Horizontal Adjustment
Vertical Adjustment
(optional with EasyWeld 110,
supplied with EasyWeld 110 T)
Angle Scale
Upper Rod for Securing the
Facing Tool/Heating Element
Force Indicator
Lower Rod for Securing the
Facing Tool/Heating Element
Hand Wheel for
Moving the Carriage
Version February 2022