Installation; Installation Warnings; Choice Of Installation Location; Minimum Functional Space - emmeti EQ 2018 Manuel D'installation Et D'utilisation

5. INSTALLATION

5.1 Installation Warnings

WARNING
The installation and maintenance of heat pumps must only be per-
formed by qualified technicians and authorised companies.
- Installation must only be carried out by qualified and authorised techni-
cians.
- Do not attempt to install the device on your own initiative.
- For repairs contact the Technical Support Team.
Electrical repairs must be carried out by qualified electricians.
- Unsatisfactory work may result in serious damage to the user.
- The list of technical support centres is available on the following website:
www.emmeti.com.
Correct installation of the Eco Hot Water guarantees efficient use.
Therefore, we ask you to carefully abide by the instructions in relation
to installation, connections and testing as they are documented in this
manual.
WARNING
Danger of cuts : use suitable gloves.

5.2 Choice of Installation Location

• The unit must be installed indoors and protected from the weather.
• It must be installed vertically in places such as basements, garages, etc.
• There must be easy access to the hydraulic and electrical connections for
installation and maintenance.
• The unit must be installed on a level floor that can support the weight
and any movements during use.
• Install the unit in a place that conforms to IP standards (protection against
penetration of fluids) in accordance with the regulations currently in force.
• Install the unit as close as possible to the point of use to reduce heat
loss from the pipes.
• Choose a location which does not obstruct doors and passageways.
• Do not install near to sources of heat, steam or inflammable gas.
• In case of leakage, the coolant could form toxic gasses if it comes into
direct contact with open flames.
• Child-proof the area around the area, thus preventing access.
• Install the unit in a closed area with an ambient temperature between
5 and 35 °C.
• Do not install the unit outdoors and/or in aggressive environments that
contain, for example, acid vapours, fumes, dust or saturated with gas.
• Do not install the unit in a room which contains another apparatus that
requires air for its operation (gas-fired boiler, gas water heater).
• Ensure the free movement of air around the unit.
• Do not obstruct the air intake or exhaust grills with curtains or other
obstruction. The upper part should be free of any obstacle, do not store
any objects on the unit.
Ensure that the "minimum functional space" is respected at all times.
44

5.3 Minimum Functional Space

GB GB