Select Operating Mode - emmeti EQ 2018 Manuel D'installation Et D'utilisation

6. USE OF THE ECO HOT WATER

Select operating mode

With the unit OFF or in operation, press the
desired operating mode.
Modality HEATING
TEMP
Touch
Modality Holliday
TEMP
ECO-HEATING MODE
In ECO-HEATING mode, the water is heated only by means of the heat
pump. The compressor comes on when the temperature in the lower part
of the accumulator (BTT) drops below the value set minus the differential
and stops when the value set has been reached.
However, it is possible to operate the electric heater manually
provided that the temperature in the upper part of the accumulator (TTT)
58
key again to select the
Touch
TEMP
Touch
Date 20 august
Touch
TEMP
ECO-HEATING
Air temperature (° C)
Electrical resistance
Head pump
Modality ECO-HEATING
Modality INTELLIGENT
is less than the value set minus the differential.
The electric heater will turn off automatically when the TTT has reached
the value set or can be manually turned off at any time.
NOTE:
If the ambient temperature (AT) falls below -5 °C, the compressor is
stopped and the electric heater starts to function.
GB GB