Operating The Unit; Keypad Lock Function - emmeti EQ 2018 Manuel D'installation Et D'utilisation

6. USE OF THE ECO HOT WATER 1. DESCRIPTION OF COMPONENTS

6.4 Operating the unit

Turning the unit on and off
To turn on the unit, hold down the button
Temperatures are displayed of the water in the upper part (TTT) and in
the lower part (BTT) of the accumulator.
To temporarily display the temperature of the water in the lower part of
the accumulator (BTT) at full screen, press the key for 2 seconds.
To turn off the unit ,hold down the key
OFF appears.
If during the operation of the unit or in the OFF mode electrical power
is disconnected, the unit will resume in the mode in which it was at the
moment the power supply was cut off.

Keypad lock function

To activate the keypad lock function, press and hold the key for about 5
seconds until the padlock symbol appears.
To remove the keypad lock function, press and hold the key
5 seconds until the padlock symbol disappears.
If the keypad is locked and then the power is turned off, the unit will return
to the mode in which it was in previously when power is restored but the
keypad will not be blocked.
for about a second.
Modalità riscaldamento
L'unità è spenta.
.
for about a second after which
Temperatura acqua in uscita
nella parte
Premere per mezzo secondo
alta dell'accumulo
Acqua nella parte
alta dell'accumulo
TEMP
L'unità è accesa
for about
The unit is off.
Touch for half a second
Water temperature
in the lower part
accumulation
TEMP
The unit is on
Touch for 2 second
Water temperature
in the lower part
accumulation
TEMP
TEMP
Touch for 5 second
TEMP
GB GB GB GB
Water temperature
in the
high accumulation
Padlock icon
53 53