emmeti EQ 2018 Manuel D'installation Et D'utilisation page 40

2. WARNINGS
Do not install the heat pumps near sources emitting excessive
vapours (moisture, oils, etc.).
Do not place objects and not climb on
Do not put your fingers or other objects into the sockets / outlets
and deflector swinging while the conditioner is in operation.
The high speed of the fan is very dangerous and can cause injury.
Use only fuses of the proper amperage.
(Makeshift replacements such as a piece of wire should never
be used. Not only could the unit itself be damage, but such action
could be the cause of a major fire).
40
Do not pour or spray water on the heat pumps.
If you experience abnormal phenomena (eg a burning smell),
disconnect the power immediately and contact your dealer for
instructions on what to do. In this case, continue to use the heat
pumps may cause damage and create the risk of electric shock
and fire.
MODE
TIMER
ON / OFF
ON / OFF
Before any maintenance remove the power supply from the heat
pumps
Note for draining water
High temperatur
The maximum temperature for the water in the circulation is about
60 °C. Be careful to avoid burns when draining the water.
GB GB GB GB