emmeti EQ 2018 Manuel D'installation Et D'utilisation page 59

6. USE OF THE ECO HOT WATER
HEATING MODE
The HEATING mode of operation maintains the same functionality of
ECO-HEATING, but to which is added the automatic integration of the
electric heater as a function of the temperature of the environment (AT):
- If AT>25°C = heat pump only operates
- If 10°C>AT>25°C = integration of electric heater with a time delay that
can be set with the parameter r06.
- If AT<10°C = immediate integration of electric heater.
INTELLIGENT MODE
INTELLIGENT mode is not available, if selected, the unit operates in
HEATING mode.
HOLIDAY MODE
This mode can be used when you do not want to heat the water for a few
days (for example during a holiday period). The date of activation must be
set after the unit has been switched OFF.
Hold the key for 2 seconds to enter into the timer interface.
The symbol "ON" and the DATE flash. Set the day and month in which you
want the unit to turn on.
Leaving the unit in holiday mode and in the OFF position, the unit will
restart on the set day and month.
If after you have set the date of reactivation, the unit is not left switched
off (OFF) and in holiday mode, the function HOLIDAY is not enabled.
For example: today, the 20th August the unit is left in holiday mode and
OFF, and on the 28the September, the unit will restart automatically.
Touch for set day,
Touch for set day, then
then
Electrical resistance
Electrical resistance with delayed start (delay = par. r06)
Heat pump
Modality Holliday
Touch for 2 second
Touch for 2 second
Touch
Touch
Touch
Touch to return the month then
To clear the date set for the holiday mode, when the month and ON
To check the date set for vacation mode,
flash, press the key
when the month and ON are blinking, press the
To check the date set for vacation mode,
when the month and ON are blinking, press the
HEATING
Air temperature (° C)
Modality Holliday
Month Day
Month Day
Current
date
Current
date
Data
power
Data
power
to return the month then
GB GB
59