Safety Precautions; Introduction - StarLab Phoresis N2007-0810 Manuel D'utilisation

II. SAFETY PRECAUTIONS
Please read the User Manual carefully before using the STARLAB Horizontal Electrophoresis Unit. This
manual contains important operating and safety information. STARLAB's electrophoresis units are designed
to perform flawlessly for years in the most demanding laboratories. Please take the time to read this
manual so you understand the safety and operating instructions to ensure the successful use of the unit.
Alterations could cause serious injury to the user or the system.
Power to the unit is supplied by an external power supply. The power supply must meet safety standards
for IEC 1010-1 regulations and must be ground isolated and incorporate a no-load detecting circuit.
Power is supplied to the gel through the cover of the system providing a safety interlock to the user.
Users should not attempt to operate this unit without the safety inter-locked cover in place.
• To avoid the risk of personal shock always disconnect the unit from the power supply before:
a) removing cover , b) moving the unit or, c) adding running buffer.
• Running conditions should not exceed the maximum operating voltage or current.
• DO NOT fill the buffer chamber with running buffer above the maximum fill line.
• Use this apparatus only for its intended purpose and as described in this manual.
• Do not use the product if the power cords are damaged or if its surfaces are cracked.
• Do not operate electrophoresis units in metal trays.
CAUTION: During electrophoresis very low quantities of various gases are produced at the electrodes.
The type of gas produced depends on the composition of the buffer employed. To disperse these gases
make sure that the unit is run in a well-ventilated area.
III. INTRODUCTION
Thank you for purchasing a StarPhoresis Mini Gel Horizontal Electrophoresis System.
The system allows quick separation and analysis of nucleic acids on an agarose gel.
Gels can be cast in a variety of ways:
• Use the gasketed trays directly in the buffer chamber.
• Use multiple gasketed trays in optional casting trough.
• Tape ends of trays.
• Use one of the optional adjustable casting platforms.
The UV transparent gel trays are available with a variety of comb slot configurations. Combs are available
in 1.0mm and 1.5mm thicknesses, as well as a variety of tooth configurations to accommodate varying
numbers of samples and sample volumes.
Outstanding features ensure trouble-free use
The robust, acrylic construction stands up to daily usage without breakage, warping or leakage. All
of STARLAB's Horizontal Mini and Wide Mini Gel Electrophoresis Systems are hand-made to provide
unmatched durability for years of daily use. Systems meet or exceed all safety requirements for the
IEC 1010-1 Standards. Units accommodate gasketed gel trays, allowing casting of gels in the buffer
chamber without tape, dams or external casting stands.
4
StarPhoresis Mini and Wide Mini Gel Horizontal Electrophoresis Systems