MANUAL CLEANING AT THE END OF SERVICE (or between 2 different types of cooking)
- Start the appliance.
- Wait a few seconds for the welcome screen to clear.
- Check that the drain outlet is closed
- Add as required a degreasing agent (after cooking with oil...) or a descaler (after cooking using water ...)
- Clean the base using a spatula suitable for high temperatures or a special stainless scourer. Clean the cooktop regularly as it is
important to avoid repeated incrustation of dirt
- Finish the rinse with the spray hose
- Dry with paper towel
Note: It is strongly advisable to dry the base of the tank. Stagnant water mixed with cleaning products or chlorine, even diluted, can in the long term,
cause irreversible corrosion to the tank base
25.3
RAPID CLEANING OF TANK
- Start the appliance.
- Wait a few seconds for the welcome screen to clear.
- Check that the drain outlet is closed
- Clean the base using a spatula suitable for high temperatures or a special stainless scourer. Clean the cooktop regularly as it is
important to avoid repeated incrustation of dirt
Page 6
"END" finishes the cycle.
- Fill the tank with a few centimetres of water
- Heat the water to around 55°C to activate the product