Commissioning, Operation - SICK PBS plus Notice D'instruction

Operating Instructions

5. Commissioning, operation

5.1 Checking device
Do a visual inspection of the pressure switch before commissioning.
Escaping liquids indicate damage.
„
Only use the pressure switch when its safety technology is working perfectly.
„
Do an optical inspection for membrane damage, this is a safety-relevant part.
„
5.2 Requirements on the mounting location
The mounting location must fulfill the following conditions:
Protected from weather influences.
„
At high ambient temperatures and high UV radiation, the pressure switch must be installed
„
with additional shading to prevent damage to the digital display and pushbuttons.
Sealing surfaces are clean and undamaged.
„
Sufficient space for safe electrical installation.
„
For information on threaded bore holes and weld-in connections, see the technical information
„
at www.SICK.de.
Permissible ambient and measuring material temperatures remain within the performance
„
limits. Take into account possible restrictions on the ambient temperature range due to the
mating plug used.
→ For performance limits, see Chapter 9 "Technical data".
„
8024946 | SICK AG
Subject to change without notice
5. COMMISSIONING, OPERATION
O P E R A T I N G I N S T R U C T I O N S P B S p l u s
PBS plus
4 3