SICK PBS plus Notice D'instruction page 59

Operating Instructions
8.2 Returns
When returning the device, it is crucial to note the following:
All devices delivered to SICK must be free from hazardous substances (acids, lyes, solutions, etc.)
and must therefore be cleaned before they are returned. A corresponding declaration of clearance
must be enclosed with the sensor. You will find this on our Internet page.
WARNING!
Bodily injury, property and environmental damage caused by measuring material
residues
Measuring material residues in the removed device could be hazardous to persons,
equipment and the environment.
If there are hazardous materials, enclose the safety data sheet for the respective
„
measuring material.
Clean device, see chapter 7.2 "Cleaning".
„
The device must be returned in its original packaging or packaging that is suitable for transport
purposes.
You can find information on returns in the "Service" section on our local Internet page.
8.3 Disposal
Incorrect disposal could endanger the environment.
Dispose of device components and packaging materials in compliance with country-specific waste
treatment and disposal regulations and in an environmentally-friendly manner.
8024946 | SICK AG
Subject to change without notice
8. DISASSEMBLY, RETURN AND DISPOSAL
O P E R A T I N G I N S T R U C T I O N S P B S p l u s
PBS plus
5 9