Setting The Clock - Atag OX4411B Mode D'emploi

SETTING THE CLOCK

When the appliance is fi rst plugged in, the display lights up.
Setting the Clock (example 15:15)
1 Turn the MODE SELECTOR to the
"OFF" position.
3 Turn the MULTI-FUNCTION
SELECTOR to set the hour.
5 Turn the MULTI-FUNCTION
SELECTOR to set the minutes.
Note
If you want to change a setting after you have pressed a button, the setting starts blinking.
You can only change this setting during blinking. If it has stopped blinking, you have to press
the button so it will start blinking again.
EN 10
2 Press CLOCK. The "12" starts
blinking.
4 Press CLOCK again. The "00" starts
blinking.
6 Press CLOCK again. The clock sets
by itself within 5 seconds.