Bringing The Oven Into Operation Before You Start Cooking; Switching On - Atag OX20A Serie Mode D'emploi

bringing the oven into operation
before you start cooking
cleaning the oven and accessories
Remove the accessories from the oven and clean the
accessories and the inside of the oven with a mild cleaning
agent.
Switch the oven on for an hour at 250 °C (see page 7).
Protective greases used during manufacture will then be
removed.
remark
When your oven is heated strongly for the first time, it will
have a 'new' smell. This is normal. Switch the extractor hood
on if necessary.
After the oven has cooled down, clean it with warm water.
GB 6

switching on

functions
1 Select an oven function.
selecting function
temperature
225
2 Set the temperature required.
setting the
temperature
cooking time*
45
3 Set the cooking time.
The indicator lights above the knobs light up.
If you do not wish to set a cooking time, you turn the knob
to ,.
setting the time
switching off
Turn the knobs to {.
1
The indicator lights go out.
attention!
The oven will only function if the timer* is set to , , or if
a time has been set.
* if present
operation
switching on
GB 7