Setting The End Time - Atag OX4411B Mode D'emploi

SETTING THE END TIME

1 Choose the desired mode (and set
the temperature if preferred).
3 Turn MULTI-FUNCTION SELECTOR
to set desired hour and minute.
(14:00).
Example Desired time is 14:00.
5 Automatically start after 5 seconds.
Note
1) The cooking time will count down in the time display. When the setting time has elapsed,
an audible signal sounds, "0:00" will blink in the display and the oven switches itself off .
The current time is shown in the display.
2) During cooking, you can adjust the preset cooking time for better cooking performance.
Press COOK TIME and change the time with the MULTI-FUNCTION SELECTOR.
3) To cancel the programmed end time, press COOK TIME and set the time to zero with the
MULTI-FUNCTION SELECTOR.
EN 28
2 Press END TIME.
Example Current time is 13:00 The current
time's digit "13:00" will blink.
4 Press END TIME again.
Example Current time is 13:00.
Desired end time is 14:00.
Cooking time "1:00" is displayed.