Setting The Clock; Child Safety Function - Atag OX6411B Mode D'emploi

SETTINGS

Setting the Clock

Child Safety Function

EN 12
When the power is first supplied to the oven, the display on the control
panel will light briefly. After 3 seconds, you will see '12:00' in the
display.
You can use the 'child lock function' in standby status.
1 Press the Time Select Knob,
the hour fi gures blink.
2 Turn the Time Select Knob, set
the desired time in hours.
3 Press the Time Select Knob,
the minute fi gures blink.
4 Turn the Time Select Knob, set
the desired time in minutes.
5 Press the Time Select Knob to
confi rm.
1 Press the Time Select Knob,
hold for 3 seconds. (L) will
appear in the display.