OPERATION & SERVICE MANUAL FOR MOWER DECK
SSM60-TH4330E4
Fig.10-3
Important:
• Inspect the oil seals for wear and deformation.
(Oil seals are fundamentally consumable parts,
so disassemble ones should be replaced with
new ones.)
• When installing on oil seal, take care not to
allow the lips of the oil seal to turn up or the
oil seal to be installed slanted.
• Inspect the bearings for wear or abnormal
noise and replace defective ones.
• After reassembly, make sure the shaft turn
smoothly.
• After reassembly, apply sufficient grease to
lubrication points.
64