C8.4 Int. Self Act. On/Off; C8.5 Triple Call On/Off - Comelit 1998NA Manuel Technique

How to configure a secondary switchboard
- press MENU and use the
8-ADVANCED OPTIONS menu, then press 8:
8-ADVANCED
OPTIONS
- use the keys to view the 3-TYPE OF
SWITCHBOARD MENU, then press 3;
3- TYPE OF
SWITCHBOARD
- press 1;
*1- SECONDARY
2- MAIN
The switchboard is configured as SINGLE CPS by
default.
It can now be configured as SERIES CPS, in fact the
function 2-PARALLEL CPS IS NOT AVAILABLE;
*1- SINGLE CPS
2- PARALLEL CPS
- to configure it as SERIES CPS, use the
view the 3-SERIES CPS menu, then press 3;
*3- SERIES CPS
- to configure it as MASTER press 1; to configure it
as SLAVE press 2;
1- MASTER
2- SLAVE

C8.4 Int. self act. on/off

This is disabled by default.
This function is only available for non-TOP Simplebus
systems and requires Art. 1259C for the cyclic
displaying of images from remote cameras.
This function can be used to activate or deactivate
the self activation transmitted by the internal units
with the switchboard in DAY mode.
To activate the function:
- press MENU and use the
8-ADVANCED OPTIONS menu, then press 8;
8-ADVANCED
OPTIONS
- use the
IGNITION ON/OFF menu;
keys to view the
- press 4 to activate or deactivate the function;

C8.5 Triple call on/off

This is disabled by default.
This function can be used to activate or deactivate
the triple call made by the switchboard to the internal
units.
The call will therefore take place on 3 consecutive
occasions (in the case of video calls: the first 2 will
be audio calls and the third will be a video call).
To activate the function:
- press MENU and use the
8-ADVANCED OPTIONSmenu, then press 8;
keys to
- use the
OFF menu;
- press 5 to activate or deactivate the function;
keys to view the
keys to view the 4-INT. SELF-
4-INT. SELF-IGNITION
ON/OFF
SERVICE
ACTIVE
SERVICE
NON ACTIVE
keys to view the
8-ADVANCED
OPTIONS
keys to view the 5-TRIPLE CALL ON/
5-TRIPLE CALL
ON/OFF
SERVICE
ACTIVE
SERVICE
NON ACTIVE
47