Warning
• This Comelit product has been designed and manufactured for use in the creation of audio and video communication systems in residential, commercial,
industrial and public buildings.
• All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with careful observation of the
indications provided in the manuals / instruction sheets supplied with those products.
• Disconnect the power supply before carrying out any operations on the wiring.
• Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system manual.
• We advise against running the system wires through the same duct as power cables (230V or higher).
• To ensure Comelit products are used safely: carefully observe the indications provided in the manuals / instruction sheets; make sure the system created
using Comelit products has not been tampered with / damaged.
• Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance with the indications provided in
the manuals /instruction sheets. Any repairs must be carried out: for the products themselves, exclusively by Comelit Group S.p.A.; for the systems, by
qualified technical personnel.
• Comelit Group S.p.A. accepts no liability for any purpose other than the intended use, or failure to observe the indications and warnings contained in
this manual / instruction sheet. Comelit Group S.p.A. reserves the right to change the information provided in this manual / instruction sheet at any time
and without prior notice.
Table of contents
Description ................................................. 28
Device (see page 4) ......................................................... 28
Keypad ............................................................................. 28
Connections ............................................... 29
System status .......................................................................................31
Menu navigation .............................................................. 31
Use .............................................................. 32
U5 How to set up communication between 2 internal units (intercom
function) ......................................................................................... 34
main switchboard ....................................................................... 38
switchboards ............................................................................... 39
26
Settings ...................................................... 40
I1 Change time .....................................................................................41
I2 Change date .....................................................................................41
I5 Change language .............................................................................43
I7 All names deleted .............................................................................43
C8.2 Calling mode ...............................................................................45