Description; Device; Keypad; Alphanumeric Keypad - Comelit 1998NA Manuel Technique

Description

Audio porter switchboard in desk version for
Simplebus 1 system with microswitch keypad and
32-character alphanumeric display. Ergonomic handset
with positioning on the base facilitated by invisible
magnetised panels. Allows the code and name of
the called and calling users to be displayed, keeping
unanswered calls stored in the memory. Manages Day/
Night mode and the user/user intercom service. Allows
management of alarm signals originating from users.
Up to 1000 users can be saved in the memory. Comes
with a removable cable with connection hub. 24 VAC
power supply with Art. 1195.
The main functions of the switchboard are as follows:
• call an internal unit
• receive calls from external units and transfer them
to internal units as necessary
• receive routine or alarm calls from the internal units
• control external unit electric locks
• activate a relay
The porter switchboard also offers:
• DAY/NIGHT management allowing switchboard
functions to be enabled only in specific time bands
that can be programmed by the user;
• a CALL QUEUE, in which the calls from internal
units which could not be answered are stored;
• a NAME DIRECTORY which can be programmed
so as to identify the caller easily.
Device (see page 4)
1. Call volume adjustment (high - medium - low)
2. Speed numbers
3. Message indication display

4. Keypad

5. Alphanumeric keypad

6. Customisable nameplate
7. Handset
28
Keypad
ON/OFF Power on (press and hold for 2
seconds)/power off
"MASTER" "SLAVE" control key for main or
secondary switchboards in series
DAY or NIGHT mode enable key
Name directory key
Name directory and menu scroll keys
Keys used to scroll through missed calls
Key used to cancel a call or delete entered
data
Exit menu key
MENU key
Confirm key
Call key
Lock-release key
Call transfer ("Follow me") key
Call hold key
Key used to call the main switchboard from
the secondary switchboard
Key used to activate an additional relay
Alphanumeric keypad
For several of the functions, the keypad can be
used to enter both numbers and letters; this can be
done by pressing the same button several times, for
example if you press key 2 several times, A – B - C
- 2 will appear in succession. If a different button is
pressed, the cursor on the display will move onto the
next letter.
1
Key for entering symbols ÄÅÆÖÜØß1
Moves the cursor onto the next letter
Moves the cursor onto the previous letter
f Press to confirm the data entered.
f Press to clear the data entered.