U11 How To Edit A Contact In The Directory; U12 How To Use The Lock-Release; U13 Day/Night Operating Mode - Comelit 1998NA Manuel Technique

U11 How to edit a contact in the directory

If you wish to edit a contact in the directory:
- view the name you want to change by scrolling
through the directory using the
How to find a name in the directory".
JENNIFER
SB CODE 001
- to confirm the selected name, press
CHANGE
NAME?
- press OK;
CHANGE NAME:
JENNIFER
- the cursor will be positioned on the first letter.
Change the name using the alphanumeric keypad,
moving from one letter to the next using the
keys, to delete a character press CANC;
CHANGE NAME:
NOEMI
- to confirm the name changes, press OK;
press ESC to exit.
- the Simplebus code for that user will be displayed,
to change it press CANC and enter the new number
using the alphanumeric keypad:
CHANGE
SB CODE 001
- to confirm the Simplebus code change, press OK;
press ESC to exit.
- if present, the indirect Simplebus code for that
user will be displayed, to change it press CANC
and enter the new number using the alphanumeric
keypad:
CHANGE INDIRECT
CODE 000001
- to confirm the indirect code change, press OK;
STORING IN
MEMORY...
- press ESC to exit.
36

U12 How to use the lock-release

The external unit electric lock can be controlled
by pressing key
keys, or see "U9 confirmation tones will sound.

U13 Day/night operating mode

The porter switchboard has two operating modes:
:
- DAY mode
- NIGHT mode
In DAY mode, all calls originating from the external
unit are received by the switchboard, which can
transfer them to the internal units as necessary.
In NIGHT mode, the switchboard intercepts calls
from the external unit, only if they are directed to the
switchboard (code 240). Calls directed to the internal
units appear on the display, but are not intercepted
by the switchboard.
The operating mode may be activated in 2 different
ways:
• manually, using the DAY/NIGHT key
Press
immediately.
The operating mode is indicated on the display:
- DAY with the symbol: (_ _)
- NIGHT is indicated with the text NIGHT.
CAUTION! NIGHT mode is only available if
there is a main external unit.
• in automatic mode (programming performed by
the installer, see "I3 Automatic day/night").
The text AUTO will only appear during operation
during the DAY. During operation in automatic
mode, DAY/NIGHT modes can be switched
manually (
excluded and reactivated at the next programmed
switching time.
; if the command is executed
to change the operating mode
); in this case, automatic mode is
.