Paging Call; How To Initiate A Paging Call; How To Answer A Paging Call; Self-Ignition Function - Comelit HFX-7004M Manuel Technique

5.2 PAGING CALL

5.2.1 How to initiate a paging call

f Press to initiate the all-page chime
» After the chime sounds, a 30 seconds message can be
broadcast to all monitors on the system (maximum 4
monitors).
1
A call from the external unit always takes priority over an intercom communication or a paging call.
» the call in progress will be terminated for the other devices.

5.3 SELF-IGNITION FUNCTION

√ Self-ignition is possible only when the system is in standby
f Press and release the self-ignition button (
display on the monitor the video from the external unit.
f Press again to cycle through several cameras.
5.3.1 How to display on the monitor the image
transmitted from the CCTV camera
√ During "call in progress" or during Self-ignition.
f Press the programmed button to display on the monitor the
image transmitted from the CCTV camera.
by default) to
MAIN EXTERNAL
UNIT
CCTV
CAMERA

5.2.2 How to answer a paging call

f Press to answer the paging call
» a (300 seconds) point to point conversation between the
two monitor is estabilished.
» the paging call will be terminated for the other devices.
If a call is underway with an external unit it is NOT possible
to cycle between the external units.
Long press on key to enable / disable the function.
MAIN UNIT 1
UNIT
f Press again to cycle through several cameras and come
back to the external unit
MAIN
UNIT
CAMERA 1
2
cycle
UNIT 2 UNIT 3
cycle
CAMERA 2 CAMERA 3
31