5.5.1 How to display on the monitor the image
transmitted from the CCTV camera
√ During "call in progress" or during Self-ignition.
Press the programmed button to display on the monitor the
image transmitted from the CCTV camera.
5.6 LOCK RELEASE FUNCTION
√ During "call in progress" or during Self-ignition.
Press
» the
5.7 PRIVACY MODE
Press
» The
In Privacy mode the paging call are still received
5.8 DOCTOR MODE
Press the programmed button for 4 sec to disable / enable the doctor mode
» a confirmation tone will sound
» 4 flashes (every 5 sec.) of the
4 Sec
5.9 HANDS-FREE MODE
Feature is not suitable when 2 or more monitors are installed
CCTV
CAMERA
to release the lock.
LED will illuminate on the external unit.
to disable / enable the ringtone for calls from the external unit and paging call.
LED on indicates that the Privacy function is active.
LED indicate that the doctor mode is active
Press
» A confirmation tone will sound
» The
2 Sec
Press again to cycle through several cameras and come
back to the external unit
MAIN
CAMERA 1
UNIT
for 2 sec to activate / deactivate Hands-Free mode
LED indicates that the Hands-Free mode is active.
cycle
CAMERA 2
CAMERA 3
39