Initial Operation - SATA HRS Mode D'emploi

Description
Air consumption at 44 psi
Nozzle size (diameter)
Air connection thread
Weight of HRS variant without material
flow control
Weight of HRS variant with material
flow control
Weight of HRS-E variant with material
flow control

8. Initial Operation

The pressure spray gun is delivered completely assembled and ready for
operation.
After unpacking check whether:
■ Damage to pressure spray gun
■ The scope of delivery is complete (see 5)
Danger!
Explosion risk!
An explosion may result if unsuitable air hoses are used.
→ Use only undamaged, solvent-resistant, anti-static air hoses in good
working condition that have a continuous compression strength of at
least 290 psi,, and an inside diameter of at least 0.4" as well as a
leakage resistance of < 1MOhm, such as the SATA air hose (Art. No.
53090).
Information!
Use a compressed air connection with a 1/4" male thread or suitable
SATA quick connect nipple.
Use uncontaminated compressed air by using an SATA filter 484 (Art.
No. 92320), for example.
■ Check all screws for tightness.
Operating Instructions for SATA HRS
Variation
with plas-
tic pressure
approx. 3.5
1/4'' male
35.6 oz.
Variation
with alumi-
num pres-
cup sure cup
approx. 3.5
cfm
1.5 mm
1/4" male
thread
32.5 oz.
– 33.2 oz.
– 45.9 oz.
US
cfm
1.5 mm
thread
475