Eu Declaration Of Conformity - SATA HRS Mode D'emploi

Operating Instructions SATA HRS
EN
Art.
No.
[6-13]
11973
[6-14] 54049 *
[6-15] 8359
[6-16] 11510
[6-17] 17111
[6-18] 11445 *
[6-19]
11544 *
[6-20]
53082 *
[6-21] 10322
[6-22] 182 *
161158
* only available in repair set 161158

16. EU Declaration of Conformity

Manufacturer:
SATA GmbH & Co. KG
Domertalstrasse 20
D-70806 Kornwestheim
We hereby declare that the product named in the following, on the basis of
its conception, construction and type of construction in the model we have
brought onto the market, corresponds to the fundamental safety require-
ments of the 2014/34/EC guideline including the changes applicable at the
time of this declaration and can be used according to EC-Directive 2014/34/
EC as well as having regard to the ATEX product identification in explo-
sion-hazard areas.
Product description: .......................................................paint spray gun
Type designation: .....................................................................SATA HRS
ATEX certification: ..................................................... II 2G Ex h IIB T4 Gb
Pertinent directives:
• EN 60079-0:2013, EN 60079-11:2012, EN 60079-26:2015
• EU machinery directive 2006/42/EU
• EC Directive 2014/34/EC Devices and protection systems for intended
use in explosion hazard areas
Applied harmonised norms:
• DIN EN 1127-1:2011 "Explosion control part 1: Basics and methodology"
128
Description
Pressurized cup, aluminium
Seal ring
quick coupling
Mixing cap
Safety valve
Pressure spring for air piston
Compression spring for paint needle
O-ring 12 mm x 2 mm, Perbunan
Guide sleeve
Counter nut
Repair kit for HRS
** available as service unit
Num-
ber
1 pc.
4 ea.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 set
1 pc.
1 set