Software Settings - Struers RotoPol-31 Mode D'emploi

Software Settings

6
RotoPol-31/-35
Instruction Manual
Locate the end of the drain hose where a short length of the
steel reinforcement has been stripped away. Mount the
stripped end of the hose onto the water outlet tube, or onto
the drain elbow pipe if such is mounted. Use hose clamp for
fastening.
Lead the other end of the drain hose to the water outlet.
Arrange the tube so that it slopes throughout its length.
Shorten the hose, if necessary. The drain hose should be
attached to the water outlet system if possible.
Avoid sharp bends in the drain hose and make sure that the hose slopes
Switch on the power at the main switch. The following display
will appear briefly:
- ROTOPOL-31 -
VERSION X.Y
When the operation menu appears, you are ready to choose
the language you prefer in the display.
REMEMBER
throughout its length.
- ROTOPOL-35 -
VERSION X.Y