Minimize Wear And Avoid Damage - Stihl MSA 160 C Notice D'emploi

Minimize Wear and Avoid
Damage
Observing the instructions in this manual
helps reduce the risk of unnecessary
wear and damage to the power tool.
The power tool must be operated,
maintained and stored with the due care
and attention described in this
instruction manual.
The user is responsible for all damage
caused by non-observance of the safety
precautions, operating and maintenance
instructions. This includes in particular:
Alterations or modifications to the
–
product not approved by STIHL.
Using tools or accessories which
–
are neither approved or suitable for
the product or are of a poor quality.
Using the product for purposes for
–
which it was not designed.
Using the product for sports or
–
competitive events.
Consequential damage caused by
–
continuing to use the product with
defective components.
Maintenance Work
All the operations described in the
"Maintenance Chart" must be performed
on a regular basis. If these maintenance
operations cannot be performed by the
owner, they should be performed by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
MSA 160 C, MSA 200 C
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
If these maintenance operations are not
carried out as specified, the user
assumes responsibility for any damage
that may occur. Among other things,
this includes:
Damage to the motor due to neglect
–
or deficient maintenance (e.g. not
cleaning cooling air inlets).
Damage to the charger caused by
–
incorrect electrical connection
(voltage).
Corrosion and other consequential
–
damage to the machine, battery and
charger due to improper storage
and use.
Damage to the product resulting
–
from the use of poor quality
replacement parts.
Wear parts
Some parts of the machine are subject
to normal wear and tear even when the
machine is used in conformity with its
intended use. These parts must be
replaced in due time, depending on the
nature and duration of use. These
include, among others:
Saw chain, guide bar, chain
–
sprocket
Battery
–
English
87