Guide To Using This Manual; Safety Precautions And Working Techniques - Stihl TS 700 Notice D'emploi

English

Guide to Using this Manual

Pictograms
Pictograms that appear on the machine
are explained in this Instruction Manual.
Depending on the machine and
equipment version, the following
pictograms may appear on the machine.
Fuel tank; fuel mixture of
gasoline and engine oil
Actuate decompression
valve
Actuate manual fuel
pump
Water connection, shut-
off cock
Tensioning nut for belt
Pull starter grip
2
Symbols in text
WARNING
Warning where there is a risk of an
accident or personal injury or serious
damage to property.
NOTICE
Caution where there is a risk of
damaging the machine or its individual
components.
Engineering improvements
STIHL's philosophy is to continually
improve all of its products. For this
reason we may modify the design,
engineering and appearance of our
products periodically.
Therefore, some changes, modifications
and improvements may not be covered
in this manual.
Safety Precautions and
Working Techniques
Special safety precau -
tions must be taken when
working with the cut-off
machine, due to the very
high rotational speed of
the abrasive wheel.
It is important you read
and understand the User
Manual before commis -
sioning and keep it in a
safe place for future ref -
erence. Non-observance
of the safety precautions
may result in serious or
even fatal injury.
Observe all applicable local safety
regulations, e.g. by trade organizations,
social insurance institutions, labor safety
authorities etc.
As for employers within the European
Community, the provision 2009/104/EC
is binding – Safety and health protection
with the use of machines and devices by
employees at work.
If you have never used a power tool
before: have your STIHL dealer or other
specialist show you how to operate the
machine – or attend one of the special
training courses.
Minors should never be allowed to use
the machine – except for apprentices
over the age of 16 when working under
supervision.
Children, animals and bystanders must
not be allowed near the machine.
TS 700, TS 800