Introduction; Safety Messages; Working With The Product - Hürner HWT 125 SW 2.0 Manuel Utilisateur

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
1

Introduction

Dear Customer:
Thank you very much for purchasing our product. We are
confident that it will perform to your fullest satisfaction.
The HWT 125 SW 2.0 socket welding system is designed
exclusively for welding components made of thermoplastic
material using the socket welding process as described in
the appropriate DVS or ASTM standards.
It was manufactured according to state-of-the-art technol-
ogy and recognized safety regulations and is equipped
with the appropriate safety features.
Before shipment, the product was checked for operation
reliability and safety. Errors of handling or misuse, how-
ever, may expose the following to hazards:
· the operator's health,
· the product and other assets of the operating entity,
· the efficient work of the product.
All persons involved in the installation, operation, main-
tenance, and service of the product have to
· be properly qualified,
· operate the product only when observed,
· read carefully and conform to the User's Manual
before working with the product.
Thank you.
2

Safety Messages

Compliance with the following safety rules is critical for
the effective use of the product and for working without
exposing oneself to hazards.
2.1

Working with the Product

• Keep the workplace and the equipment itself clean.
• Use appropriate caution when operating the product.
• Always dress appropiately when intending to use the
product: long trousers, heat-resistant safety gloves
and safety shoes, helmet if working on construction
sites.
• Do not wear scarfs, necklaces, watches, rings or any
other object that could get caught in the moving parts
of the product.
Version January 2019 HWT 125 SW 2.0 User's Manual
5
EN