Introduction; Safety Messages; Working With The Machine - Hürner EasyWeld 110 Manuel Utilisateur

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
1

Introduction

Dear Customer:
Thank you very much for purchasing our product. We are
confident that it will perform to your fullest satisfaction.
The EasyWeld 110 (T) butt-welding machine is designed
exclusively for welding pipes and components made of ther-
moplastic material with one of the diameters it is intended
for, using the butt-welding process with heating element.
The product was manufactured according to state-of-the-
art technology and recognized safety regulations.
Before shipment, the product was checked for operation re-
liability and safety. In case of errors of handling or misuse,
however, the following may be exposed to hazards:
• the operator's health,
• the product and other hardware assets of the operator,
• the efficient work of the product.
All persons involved in the installation, operation, mainte-
nance, and service of the product have to
• be properly qualified or trained,
• operate the product only when observed,
• read carefully and conform to the User's Manual before
working with the product.
Thank you.
2

Safety Messages

Compliance with the following safety rules is critical for the
effective use of the product and for working without expos-
ing oneself to hazards.
2.1

Working with the Machine

• Keep the workplace and the equipment itself clean.
• Use appropriate caution when operating the machine.
• Operate the machine only when the power supply cords
are perfectly in order (no damage, kinks, twists or knots)
and protect the cords against cutting edges.
• Always dress appropiately when planning to use the
machine: long trousers, heat-resistant safety gloves and
safety shoes.
• Do not wear scarfs, necklaces, watches, rings or any oth-
er object that could get caught in the moving parts of
the machine.
Version February 2022 HÜRNER EasyWeld 110 (T) User's Manual
5
EN