Work Environment; Intended Use - Hürner HWT 125 SW 2.0 Manuel Utilisateur

• Do not expose the product to the elements and do not
use it in unfavorable weather conditions (fog, snow,
rain, high levels of humidity, etc.).
• Respect any applicable rules on occupational safety
in force at the place where the product is used, and
use common sense to avoid any hazardous situation.
2.2

Work Environment

• Do not use the product when flammable liquids
or gases, chemical or corrosive agents are in the vicin-
ity.
• Make sure that the place were the product is used and
its immediate surroundings are sufficiently brighty
illuminated.
• If the product has to be moved, use appropriate
moving and, as needed, lifting equipment.
2.3

Intended Use

The socket welding machine was designed and manufac-
tured for jointing pipes and/or fittings made of thermo-
plastic material by the socket fusion process. It shall be
used only for the materials quoted in its technical specifi-
cations and for components with one of the diameters for
which heating spigots and sockets are included as parts
of the product accessories.
6
EN
HWT 125 SW 2.0 User's Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Heating Element with In-
stalled Heating Spigot/Socket
Pairs of Clamp Jaws on
Pipe Side
Spacer Bolt
Bar Securing the Fitting,
adjustable with locking levers
on it and on its side
Pair of Clamp Jaws on
Fitting Side
Setpoint Assistant for Start-up
Position and Fusion Depth
Carriage Handwheel Locking Lever
Handwheels for Clamp Jaws
Handwheel for Both Carriages
Version January 2019