H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Any other use is deemed unintended use, and any such
use will void any and all warranty and liability assumed
by the manufacturer for the product, including for con-
sequential damage.
3
Machine Description
3.1
Component Overview
(see figure on previous page)
3.2
Transport, Storage, Shipment
The product ships on a palette with the accessories and
tools in a sheet metal box. If it is ordered with the op-
tional wooden transport box, it ships in this box and the
accessories and tools are located in a drawer that doubles
as the floor of the box on which the product sits.
Immediately after receipt, make sure that the
shipment is complete and in a good condition and
notify the transporter of any defects or missing
Info
part. Complaints at a later time may no longer be
eligible for remedy.
In the case of a product with the optional wooden trans-
port box, this box should always be used when the product
is shipped or forwarded. It is also suitable for storing it.
When the user is done welding, the cover of the
transport box must not be installed before the
heating element and, if they are still fitted to it,
Important
the heating spigot and socket have cooled down
completely.
3.3
Technical Specifications
HWT 125 SW 2.0
Machine
Operating Range
Compatible Materials
Power Supply
Maximum Power Input
Req. Space Operating Machine
Weight, machine only
Dims Machine in Transport Box*
Weight Machine, Acces. in Box*
Heating Element Temperature
Range
* Box referred to is optionally available w
Version January 2019
ø 20 - 125 mm
PE, PP, PVDF
230 V, 50/60 Hz or
110 V, 50/60 Hz
1.5 kW
800 × 1000 × 800 mm (31½" × 39
30.4 kg (67 lbs)
800 × 530 × 600 mm (31½" × 20
81 kg (178¼ lbs)
infinitely variable, settable from
200°C (392°F) thru 260°C (500°F)
ooden transport box.
HWT 125 SW 2.0 User's Manual
⁄
" × 31½")
3
8
⁄
" × 23
⁄
")
7
5
8
8
7
EN