Technical Data; Power Source - Migatronic PILOT 1500 HP Manuel D'instruction

PILOT 1500 HP
100% max. load
60% max. load
35% max. load
Above-mentioned values are valid for these welding
machines only. For other types, please see type plate.
60 % max. load when MMA welding means that a
cooling period of 4 minutes after welding for 6 minutes
is required at a current setting of 100 A; 10 minutes
between start of each welding period must be cal-
culated in connection with the above table.
TIG MMA
100 A 80 A
120 A 100 A
150 A 150 A

TECHNICAL DATA

Power source

Mains voltage
Fuse
Consumption, max.
Efficiency
Current range DC
Permitted load:
at 100 % duty cycle
at 60 % duty cycle
at 35 % duty cycle
Open circuit voltage DC, max.
Electrode diameter (MMA)
Slope down
Gas post-flow
TIG ignition
1
Protection class
2
Application class
Standards
Dimensions, hxwxl
Weight
Specifications and other details may be subject to
alteration without prior notice
1
The machine is designed for outdoor applications as it meets the
demands of protection class IP23. However, it is a condition that the
machine is placed in an upright position.
2 S
The machine meets the standards which are demanded of machines
working in areas where there is an increased risk of electric shock
11
PILOT 1500 HP
1x230 V ±10%
16 A
4.6 kVA
0.85
15 – 150 A
MMA TIG
80 A / 23.2 V 100 A / 14 V
100 A / 24 V 120 A / 14.8 V
150 A / 26 V 150 A / 16 V
90 V
1.6 – 3.25 mm
0 - 10 secs
3 - 30 secs
HF / LIFTIG
IP 23
S
EN/IEC60974-1
EN/IEC60974-10
34x20.5x41 cm
12.8 kg