Operation Switches - JUKI LU-2216N-7 Manuel D'utilisation

Table des Matières

Publicité

29. OPERATION SWITCHES

1
2
2 Alternating vertical movement amount change-over switch
If this switch is pressed the amount of the alternating vertical movement of the walking foot and the presser foot will
be maximized. (The lamp locating inside the button will light up.)
Use this switch when a multilayered portion of the sewing product is not smoothly fed.
3 Automatic reverse feed stitching cancellation/addition switch
If this switch is pressed when the following automatic reverse feed stitching has been specifi ed, the reverse
stitching will not take place (for once immediately after it is pressed). (Example 1)
If this switch is pressed when no automatic reverse feed stitching has been specifi ed, the reverse feed stitching
will take place (once immediately after it is pressed). (Example 2)
(Example 1) In the case where both automatic reverse feed stitching for start and that for end have been specifi ed :
A
B
C
D
If the
switch is pressed before starting
sewing, the automatic reverse feed stitching for
start (between A and B) will not be carried out.
(Example 2) In the case where neither automatic reverse feed stitching for start nor that for end have been specifi ed :
If the
switch is pressed before starting
sewing, the automatic reverse feed stitching for
start (between A and B) will be carried out.
48
1 One-touch type reverse feed switch
3
4
C
D
A
B
If the
automatic reverse feed stitching for end (between
C and D) will be carried out.
While the machine is in operation, the machine
performs reverse feed stitching as long as this
switch is held pressed, and resumes normal feed
stitching when the switch is released.
If this switch is pressed while the machine is at
rest, the feed will be set to the reverse feed state.
(The sewing machine does not run.)
If it is released, the feed will return to the normal
feed state.
A
B
C
D
If the
switch is pressed during sewing, the
automatic reverse feed stitching for end (between
C and D) will not be carried out.
switch is pressed during sewing, the
A
B
C
D

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lu-2266n-7

Table des Matières