Submenu "Video - Sygonix 2300294 Notice D'emploi

f) Submenu "Video"
This submenu enables to select various setting functions with the "
to confirm your selection. You can then change the settings as usual with the "
the " " button (6, 19).
The submenu offers the following functions:
• Enable/disable write protection
If the memory card is full and write protection is disabled, the oldest recordings are overwritten. If write protection is
enabled and the memory card is full, new recordings cannot be saved.
• Set video length
Here you can set a video duration for creating a new video file. Note that the shorter the video, the more video files
will be saved. Searching for a specific video file can be time consuming. However, shorter videos can be emailed
more easily due to the smaller file size.
• Turn microphone on/off
This setting is not available as the included cameras have no microphone in this product version.
• Enable date/time display
When this function is enabled, the date and time are always displayed in the video record. You can thus easily
determine when a specific event took place.
• Enable/disable motion detection
If the camera detects changes in the image content on channel 2, the monitor/DVR can start recording automati-
cally (channel 1+2). When this function is enabled, the recording can be started and stopped, as described in sec-
tion 10. e).
• Enable/disable automatic recording
When this function is enabled, the monitor/DVR always records the video signal of both cameras (continuous
recording). It is recommended to disable write protection so that the oldest recordings are automatically overwritten
when the memory card is full.
• Select video quality
This function enables to select two different quality levels (= video compression). Higher quality level provides more
detailed recordings, but at the same time requires more memory and reduces the recording time.
• Select recording duration for motion detection
If you have enabled motion detection and then started the recording function, the monitor/DVR records the video
(on channel 1+2) for a certain period of time provided that no change in the image content is detected on channel
2. Here you can set the recording duration.
" or " " button. Press the "
" or " " button and confirm with
" button (6, 19)
39