Installation; General Considerations; Dry Positioning; Levelling Of The Appliance - Palazzetti WT R/L Série Manuel D'installation

5

Installation

5.1 General considerations

In the following paragraphs there are some guidelines
to follow in order to obtain the maximum performance
of the product purchased.
The following instructions are nevertheless
subject to compliance with any laws and
national, regional and municipal regulations
in force in the country where the product is
installed.

5.2 Dry positioning

It is recommended to dry pre-install the appliance
in order to verify the dimensions of the various
components and air intakes.
It is necessary to align the front part of the appliance
with the internal edge of the marble top, leaving a gap
of 10 mm to allow free expansion of the appliance
(Fig. 5.2).

5.3 Levelling of the appliance

To adjust the final height of the fireplace (height of the
fire floor of the covering) simply adjust the adjustment
screws on the legs. Adjust the four feet to bring the
appliance to a distance in height from the marble cover
profile of 5 mm and a safety distance in depth from
the marble top of 10 mm (Fig. 5.2) ensuring that the
base of the fire box is level (AB) (Fig. 5.3).

5.4 Assembly diagram

Product images are purely indicative
min. 5 mm
004778150 - 18/08/2020
min. 10 mm
-
+
Fig. 5.2
Fig. 5.3
29